1979.09-1983.07：哈尔滨工业大学 本科

1983.09-1986.07：哈尔滨工业大学 硕士研究生

1986.10-1990.03：哈尔滨工业大学 博士研究生

1990.05-1992.12：大阳城8722 博士后

1996.09-1997.05：日本东北大学 高级访问学者

本科生课程：电弧物理与弧焊方法

研究生课程：材料扩散与相变

(1) Wanli Wang, Jihua Huang*, Yonglei Wang, et al. A novel process with the characteristics of low-temperature bonding and high-temperature resisting for joining C_f/SiC composite to GH3044 alloy, Journal of the European Ceramic Society, 2019, 39: 5468-5472.

(2) X. Sun, J. Huang*, J. Yang, et al. Microstructure evolution and mechanical properties of in-situ bimodal TiC-Fe coatings prepared by reactive plasma spraying, Ceramics International, 2019, 45:5848-5857.

(3) Zhi Cheng, Jihua Huang*, Zheng Ye, et al. Microstructures and mechanical properties of copper-stainless steel butt-welded joints by MIG-TIG double-sided arc welding, Journal of Materials Processing Technology, 2019, 265:87-98.

(4) Y.L. Wang, W.L. Wang, J.H. Huang*, et al. Reactive composite brazing of C/C composite and GH3044 with Ag–Ti mixed powder fillr material, Materials Science & Engineering A, 2019, 759:303-312.

(5) Zhi Cheng, Jihua Huang*, Zheng Ye, Jian Yang, et al. Butt brazing of titanium alloys/stainless steel plates by MIG-TIG double-sided arc welding process with copper filler metal, Journal of Materials Research and Technology, 2019, 8:1566-1570.

(6) Zhang Y, Huang J*, Ye Z, et al. Influence of welding parameters on the IMCs and the mechanical properties of Ti/Al butt joints welded by MIG/TIG double-sided arc welding-brazing, Journal of Alloys & Compounds, 2018, 747: 764-771.

(7) Lei X, Dong S, Huang J*, et al. Phase evolution and mechanical properties of coarse-grained heat affected zone of a Cu-free high strength low alloy hull structure steel, Materials Science & Engineering A, 2018, 718: 437-448.

(8) Niu Z, Ye Z, Huang J*, et al. Interfacial structure and properties of Cu/Al joints brazed with Zn-Al filler metals, Materials Characterization, 2018, 138:78–88.

(9) Wang W, Fan D, Huang J*, et al. Microstructural mechanism and mechanical properties of C_f/SiC composite/TC4 alloy joints composite-diffusion brazed with TiZrCuNi+TiC p composite filler, Materials Science & Engineering A, 2018, 728:1-9.

(10) Ye Z, Huang J*, Gao W, et al. Microstructure and mechanical properties of 5052 aluminum alloy/mild steel butt joint achieved by MIG-TIG double-sided arc welding-brazing, Materials & Design, 2017, 123:69-79.

(11) Ye Z, Huang J*, Cheng Z, et al. Combined effects of MIG and TIG arcs on weld appearance and interface properties in Al/steel double-sided butt welding-brazing[J]. Journal of Materials Processing Technology, 2017, 250:25-34.

(12) Fan D, Li C, Huang J*, et al. A novel composite-diffusion brazing process based on Transient Liquid Phase Bonding of a C_f/SiC composite to Ti-6Al-4V, Ceramics International, 2017, 43(15):13009-13012.

(13) Fan D, Huang J*, Zhao X, et al. Joining of C_f/SiC composite to Ti-6Al-4V with (Ti-Zr-Cu-Ni)+ Ti filler based on in-situ alloying concept, Ceramics International, 2017, 43(5): 4151-4158.

(14) Fan D, Huang J*, Sun X, et al. Correlation between microstructure and mechanical properties of active brazed C_f/SiC composite joints using Ti-Zr-Be, Materials Science & Engineering A, 2016, 667:332-339.

(15) 黄继华（主编），陈树海，赵兴科，《焊接冶金原理》，机械工业出版社，2015.

（1）“磁约束核聚变能发展研究-高导热W基复合材料制备与结构设计”，国家重点研发计划（政府间国际科技创新合作专项）；

（2）“ⅩⅩ纳米增强ⅩⅩⅩ高强韧钢及焊接结构的重大基础研究”，国家重大基础研究规划（“973”计划）；

（3）“高性能ⅩⅩ发动机ⅩⅩⅩⅩ关键基础问题研究”，国家重大基础研究规划（“973”计划）；

（4）“基于多机制复合效应的Cf/SiC复合材料与GH3044高温合金连接基础研究”，国家自然科学基金；

（5）“基于新一代高温功率芯片封装的Ni-Sn TLPS连接特性与动力学研究”，国家自然科学基金；

（6）“Cf/SiC复合材料与钛合金复合扩散钎焊动力学与界面反应研究”，国家自然科学基金。

（7）“总装“十三五”装备预研共用技术项目：ⅩⅩⅩⅩⅩ复合材料与高温合金钎焊技术研究”，“十三五”装备预研共用技术项目；

（8）“陶瓷基复合材料与金属复杂构件焊接技术”，“十三五”装备预研基金（重点）；

（9）“单晶高温合金表面缺陷修复组织调控技术”，“十三五”装备预研基金；

（10）“不锈钢与Cf/SiC复合材料高性能钎焊技术”，“十三五”装备预研基金。

“北京市青年学科带头人”（1993）；

中国机械工程学会高级会员、焊接学会常务理事；

材料研究学报、材料科学与工艺、焊接学报编委。